There is very little information about it, but not all classic cars you saw are really old. Some of them are more modern than your own car, sorry.
Being a continuation series, the new cars will receive a unique code and will be listed in the official brand registry. They will perfectly replicate both aesthetically and mechanically but are upgraded to contemporary standards, with HTP FIA-approval
Theses cars are acceptable for the FIA Historic Technical Passport (HTP) regulations that is a document that sets out the technical specification of the car for the homologation period requested and making them eligible for historic racing.
Prices are varied, they usually oscillate between € 100,000 and € 550,000 approximately
1. Authorized manufacturers
It is the most common case, there are a number of authorized manufacturers, especially for the manufacture of Shelby cobras and GT40s.
For example, for the GT40 you can find brands like Superformance, Gelscoe motorsport and Holman. If you are looking for a Shelby FIA Continuation Series you will find automakers like Shelby (Original one), All Pro Cars, Kirkham Motorsports and Superformance
2. Using a Damage Chassis
Spray-Tec directly uses a totally damaged chassis and rebuilds the car on it, so the matching numbers remain the original. It can be considered as a recreation or as an amazing restoration work. They also recreate, under the same pretext, the Aston Martin DB4
Bob Norwood is offering a California Spyder rebody at a fraction of the original one's price, about 600k$. The chassis is shortened from the 2+2 configuration to SWB Ferrari length and, using three-dimensional digital scanning technology, is rebodied in alloy to the same dimensions as the original Ferrari California GT 250 Spyder. Each of the cars in this limited production retains the original 330 serial number and is a real Ferrari, not a replica.
Here you can see the full list of Ferrari replica automakers
3. Original Automakers
Many original brands are building again classic cars under the original specifications according the requirements to be to be eligible as a FIA Continuation Series
Yes, you can call Bentley today to buy this car like any other current model
The same thing happens with Jaguar
Jaguar Classic is re-starting production of the iconic D‑type race car in Coventry, 62 years after the last example was built in 1956. Just 25 new examples of the D‑type will be meticulously hand-built at Jaguar. In 1955 Jaguar planned to build 100 D-types. With only 75 completed, Jaguar Classic is now fulfilling the company’s original ambition by creating 25 all-new, period-correct sports cars.
Jaguar also recreate six units of the Jaguar E-Type Lightweight.
Here you can see a full list of Jaguar replica manufacturers
Other car brands like Lola, Crosslé, Chevron, Scarab and Lister keep manufacturing FIA Continuation Series in very limited series
For the reborn of Chaparral brand to revive their iconic 2E, Chaparral uses original body molds,original engineering drawings and they even employ some of the people from the original team
Having original plans it's very important to creates high added value cars, and much more important for the FIA Continuation Series. For example, Gelscoe Motorsport have the GT40 original drawings. Unseen for over 25 years and thought to have been destroyed when FAV closed it’s doors for the final time. The wooden drawing cabinet you see in this picture is the original FAV chest containing the only original and complete set of GT40 drawings in existence.
AC Cars Ltd (Malta)
The AC Ace 221 is based on the original body style that was developed for the Rudd Speed version of the Ace in 1960 in combination with chassis, suspension and body modifications that were developed by the AC engineering team for the installation of the then new 221 cu in. Ford V-8 engine including slight flaring of the fenders in order to accommodate wider wheels and tires on all four corners.
The Ace Bristol is a continuation of the famous 1954 AC Ace that dominated racing in the US and abroad throughout the late 1950’s. Today AC provides mounting configuration for both the Ford EcoBoost 2 L 4 cylinder and 2.7 L 6 cylinder engines. The shape of the original Ace Bristol is maintained however the dimensions of the passenger compartment are slightly increased to accommodate the 95% of typical drivers and passengers in today’s marketplace. The Ace has four wheel independent wishbone suspension, coil over shocks, modern disc brakes, differential, electronics and interior amenities.
AC was incorporated in Malta in 2002 until 2007. The AC MKIII went into series production in July 2012 after two years of intense prototyping and development but this car is not in current production.
Similar cases happen with some reborn or revival series. They are not intended to get the FIA HTP because they are not destined for racing series, but the essence it's the same. These following cars are documented in the official registers of their respective brands
Alvis cars were produced by the manufacturer Alvis Car and Engineering Company Ltd of Coventry, United Kingdom from 1919 to 1967. Nowadays, Alvis, is resuming production of the most emblematic Alvis models from the original works drawings and using remanufactured parts
In 1936 Atalanta’s innovative approach to sports car design produced arguably the most technically advanced British sports car of the era, but only 21 original cars were produced
The Atalanta ‘Revival’ car embraces the elegance and style of the 1930’s original, remaining true to the original Atalanta design principles, and where appropriate employs the use of modern materials and technology to ensure reliability, performance and safety.
Other revival series cars
All of us know the Portuguese brand Umm, but there are some more car brands from Portugal
This model is a 2 seat road legal racing car, primarily developed for the track. Like Adamastor P003RL, all future models will be produced in small series editions.
To acquire an Adamastor, a track day must be scheduled, in order to evaluate and enhance your driving skills.
Engine – 4 -6 cylinder in line or V | Displacement – 2.3 to 3.50 litres | Gearbox – manual, semi-automatic or sequential | Power to weight ratio – 264 a 529 hp / ton
Weight – 850 kg (estimated)
Founded in 1999, by Jorge Branco, he began his activity in Cascais manufacturing kartcross and prototypes. They are known for the Smart with Hayabusa engine and a completely handmade tubular chassis
It is not the only Portuguese car brand that also build car cross vehicles
It may not be considered as an automaker as such, but its work is so good that it deserves a mention here, mainly because of its open source mentality in which everyone can collaborate.
The aim is to create bold vehicles excelling for requirement and innovation. Vehicles which respect the environment for the benefit of our health
Luso Motors is located in Guimarães, northern Portugal
Luso Motors’ company was created for design and prototyping of unique cars, for other companies at general. But they developed some internal projects
Vangest is a conglomerate of technology services companies, they developed this Dakar SUV in partnership with Grandesign